How to fix USB device format error in Windows
USB devices are useful when you need to transport pieces of data. From documents to movies, an important part of the digital community, at one time or another, we depend on this small hardware component. USB devices have become larger in terms of storage capacity and vice versa in terms of their physical size. But being electronic devices, these are also susceptible to corruption. 'Windows could not format the drive' is a fairly common error message. To address the problem in Windows, you will have to rely on one of the four best methods listed below:
Check for errors:
The Windows operating system offers a built-in error control utility that can repair most USB-related errors.
Step 1: Open the File Explorer and right click on the pen drive and select "Properties".
Step 2: Then, go to the Tools tab and then click "Check now" below the error verification.
Step 3: The next pop-up window will give you two options, "Automatically fix file system errors" and "Find and try to recover bad sectors" and then press Start. The error checking utility will be activated and will do its job at this point and you
Update the USB driver
The error "Windows could not format the pen drive" may also appear because the USB drivers are out of date. Updating the drivers is another way to resolve the error in question.
Step 1: Open the Run dialog box on your computer by pressing the Windows key and the R button at the same time and then type "devmgmt.msc" and then enter.
Step 2: You will go to the Device Manager, where you can find and expand the Universal Serial Bus Controllers. Search for unknown devices, right click on it and then click on "Properties".
Step 3: In the next window, click on "Update driver" and then select the option called "Check for updates automatically". The utility will search for the latest version of the USB driver and install it automatically on your device.
Using the command prompt
If the methods listed above do not work, the next option you can trust is the command request. You can format your pen drive using CMD.
Step 1: Connect your pen drive to your computer and remove all other USB devices.
Step 2: Open the command prompt as administrator, enter "diskpart" and press enter.
Step 3: When writing in "list of disks" all connected devices will be displayed. Write down the disk number of your USB device.
Step 4: Write "Select disk disk_number" Replace disk_number with your disk number.
Step 5: Type "clean" and then press Enter.
Using the EaseUS partition tool
If all the methods listed above fail, the EaseUS partition tool can be used to format pen drives.
Step 1: Download and install the EaseUs partition tool.
Step 2: After installing it, right click on the drive you want to format and click on "Format".
Step 3: You will be asked to set the partition label in the next step. After doing so, select the file system.
Step 4: Then, click "OK".
Step 5: Now click on "Execute operation" and then "Apply" That's all.
Final words
Share this article with your friends and help to know about "How to fix USB device format error in Windows". If you have any questions in this article let us know in the comment section down below. Like our page on all social media and help us to reach more people. Thanks a lot for reading. Cheers 🙂.